How to check jumbo frame packet by wireshark utility
Prepare 2 SUT with network card
Connect SUT1 SUT2 with NIC cable
Test procedure:
1.SUT1/SUT2 set Jumbo frame 9014K
(Windows set it from device manager ,network device)
(Linux set it by command # ifconfig eth0 192.168.1.x mtu 9000)
2.Install wireshark utility on SUT1, open monitor on jubmo frame NIC port
3.Create a share folder on SUT1, verify if SUT2 can access it
4.SUT2 upload a iso image(Large than 1G size) to SUT1 share folder
5.Verify if network packet Lengh is 9014 as below photo.
沒有留言:
張貼留言